KCT-1008A CNC ten-axis high-speed cam spring machine

This equipment adopts a heavy and stable body design, and the control system adopts a computer numerical control system developed in a targeted manner to make it more stable and intuitive to operate the interface, which is easier to control and use.

The transmission parts are specially designed and processed to make them more stable and durable, plus the precision of the transmission bearing makes it more precise, to achieve efficiency, stability, precision, durable effect, plus high-quality after-sales service, can better create value for you.

1. The machine slide seat adopts a diamond-shaped design, which has a higher precision of mechanical linkage and is durable, and at the same time, the diamond-shaped structure can be adjusted to the elastic slide seat, which can ensure that the wear gap is controlled within 0.005mm within ten years

2. The wire feeding gear is processed and produced according to 4 grades, and the slide seat is made of Japanese SLD steel (after vacuum treatment HRC59-62 degrees, and then treated by ultra-cryogenic minus 200 degrees) to ensure long-term operation accuracy and durability.

3. The mandrel adopts: L=100mm long design, suitable for the manufacturing and production of high-precision products, with the characteristics of fast production speed, accurate running accuracy, stable running performance and low operating noise, in addition, it is recommended that the tools of the machine are manufactured by high-precision technology, such as Taiwan Tonglian.

4. Combining the advantages of cam and camless structure, it will reduce the cumulative error in the operation of the tool arm, and adopt eccentric cam pushing, which is close to zero inertia, with higher production accuracy and faster running speed.

5. Adopt Taiwan Yitu computer control system, Japan Yaskawa servo motor, fast response time, good synchronization performance.

6. It adopts a 10-axis design, the 8-axis of the cutter arm and the 1-axis of the rotor core adopt 750W Yaskawa motor bus servo system, and the 1-axis of the feeding line adopts 750W Yaskawa motor pulse servo system, which makes the control performance more stable.

7. The oil road on the base of the machine adopts the design of recycling waste oil, and at the same time, it can better prevent the overflow of lubricating oil when passing through the oil tank.

8. In order to facilitate the use of the tempering furnace, the design height from the center of the mandrel to the bottom of the machine is 1.24 meters.

Specifications