With the application of the numerical control spring machine is becoming more and more common, it is very important to ensure the daily work of high efficiency. The Kaichuang spring machine of the Lee Manager hold that safeguard scientific and standardized operation and effective maintenance can not only extend the spring machine stability and operation precision, but also improve the CNC spring machine daily work efficiently and avoid machine failures and damage to. So, how to ensure the high efficiency of CNC spring machine work in daily operation?
 
  In order to ensure the daily work of high efficiency of CNC spring machine, we should pay attention to the following matters in the daily operation of the spring machine:
  ①Open the spring machine we should strictly follow the steps, pre production must be mobilized all fasteners inspection and debugging machine, in order to avoid loosening and falling or shifting phenomenon occurred in the production process, resulting in the collision caused by mechanical failure or damage.
  ②If the spring machine equipment for a long time to be placed, it should be as far as possible to release the wire wheel. For a long time of oppression will lead to bearing damage and wire feeding wheel of mild deformation may cause future spring product precision instability; if the belt line pressing time on hold too long, and may cause the deformation of wire rope, the next production will lead to the mandrel plug, precision and even damage the mandrel hole.
  ③When the apprentice is in the spring, the master should try to be on the spot to reduce or avoid unnecessary accidents. When the apprentice or technical personnel to debug, the master must be checked.
  ④The spring machine in operation to prohibit the use of hand contact with the panel. Spring products in the cut must be controlled to drop direction, in order to avoid the phenomenon of jamming caused by the knife seat; in addition, the spring products have the same must be stopped before the adjustment and modification.
  ⑤The damaged or fault spring machine equipment, professional and technical personnel shall be checked and corrected; in the repair to the relevant professional maintenance; non professional and technical personnel to disassemble, two times so as to avoid damage to computer spring machine.
 
 In short, the daily operation of the spring machine process should pay attention to the above matters, can reduce or avoid the occurrence of machine failure or damage, so as to improve the efficiency of CNC spring machine work. When the spring machine failure problem, first turn off the machine power and checked to find out the key factors that may cause problems, and then one by one investigation of possibility, finally finds out the problems and solve the source. The content source to Kaichuang spring machine: http://www.kcmcnc.com/en/, welcome to see, do not copy rights reserved!