At present, the main application of spring machine equipment, according to the structure of the function can be divided into two types of traditional cam spring machine and camless spring machine. Among them, the camless spring machine in recent years has been rapid development and wide application, and is considered to be an inevitable trend in the future development of the spring machine industry. But camless spring machine with high cost price, still let more enterprise user flinch. The Kaichuang spring machine of Li manager combined with the user experience and professional knowledge, through the traditional cam spring machine and the comparison of the camless spring machine, for the user to select the desired spring machine equipment.
 
  ①Machine operation. The camless spring machine is developed on the basis of the traditional cam spring machine, and tends to be simplified in the operation of the machine. The camless spring machine adopts unique non free cam and rocker arm design, in the operation of the computer spring machine without the need to install the cam position, only need to complete control of the driving of each position of the claw arm through the program instructions can be edited in a computer system. For the debugging work of a variety of users, the application of the camless spring machine simplifies the working difficulty of the operator, thus improving the work efficiency. Therefore, compared with the traditional spring machine, in the operation of the camless spring machine tends to simplify, but also save the time to operate the machine.
 
  ②The efficiency of the machine. The traditional cam spring machine during operation, eight station claw arm working panel is driven by a servo motor and a larger power, to achieve 360 degrees clockwise or counterclockwise rotation and position; the claw arm which can be selectively used in the molding process, and not to the axis of rotation is still in the operation, since this will cause the time delay and useless production. Without the development and application of cam spring machine, with independent servo motor drive each station to avoid useless claw arm, the claw arm alternately and the time delay during operation, thus improving the working efficiency of the machine.
 
  ③Molding of machine. The eight station claw arm traditional cam CNC spring machine is fixed on the working panel, by forming space and bending angle and other restrictions in the forming process of product, the late development of the line spring machine in these areas has been effectively supplement. In addition to the eight independent servo motor driven claw arm can be freely disassembled and assembled, and has the function of turning the line and free manipulator, so as to realize the forming of complex spring and wire forming. Therefore, compared with the traditional cam spring machine, the camless spring machine has more advantages in the complex product molding.
 
  At present the development of the traditional cam spring machine technology is relatively mature, but in the operation and forming are subject to certain limitations; development and application of camless spring machine is an effective supplement to the traditional spring machine, in operation, efficiency and forming has been greatly improved, but this does not mean that the traditional spring machine from went to the decline. For spring machine users, due to the cost of capital and market risk and other factors, it is difficult to use without a camless spring machine in the short term, so users choose to suit their own spring machine is the most important. The content source to Kaichuang spring machine: http://www.kcmcnc.com/en/, welcome to see, do not copy rights reserved!