Currently on the market of computer coiling machine products will be reserved for a line of control signal, mainly in order to effectively control the host running line in the process of production and operation in time to stop, thereby reducing unnecessary waste of materials. The Kaichuang spring machine of Li manager reminder that timely check the external control signal line connection is normal in the normal production process, should try to avoid shedding or inadvertent contact to other components, otherwise it will lead to the normal operation and operation of CNC spring machine.
 
  When the running line signal is mistakenly operated, it will cause the spring machine not to operate and operate normally, and the host system interface will appear "system not return to zero"!" Warning information. According to the prompt information, in the next normal zero operation, the system interface can not be normal zero return operation, and shows the "X zeroing" fault, please confirm the origin signal is normal!" Warning information. At this point, I believe that many users and friends of the first reaction will be that the manufacturer's computer spring machine system problems, the responsibility of the problem into the spring machine manufacturers, and asked manufacturers to give timely solution.
 
  How to solve the above situation? We can check out the problems one by one, so as to find the source of the problem and solve it. First of all, the system interface of the spring machine appeared "system not return to zero"!" Warning information, to check whether the X axis origin signal is normal, and through the hand wheel operation, X axis rotation in reverse direction, so as to exclude the X axis origin signal is normal. Second, according to the "X zeroing fault" shown by the system, please make sure the origin signal is normal!" Warning information, one by one to check the name of the external information, control line is normal, such as whether or not happened to fall off or mistakenly contact other parts, so that you can eliminate the external signal, control line is normal. Therefore, the warning message of "the system does not return to zero" is caused by incorrect operation of the running line signal, which leads to contact with other components.
 
  In a word, the existence of human operation factors will lead to various uncertainties in the process of production, and the corresponding misoperation is the main cause of the transient faults of CNC spring machine. Therefore, the scientific operation is vital to every spring machine user, and it is essential to check the connection of the components in time.The content source to Kaichuang spring machine: http://www.kcmcnc.com/en/, welcome to see, do not copy rights reserved!