Generally speaking, the 08 type spring machine is the smallest model of the computer pressure spring machine products, the general processing line diameter 0.15-0.8mm between, mainly for processing all kinds of precision pressure springs and other products. Due to the difference of regional culture, the 08 type spring machine is also called the electric 08 or the type of spring press machine, such as the creation of the KCT-8C spring machine, it is one of the most widely used in the spring machinery industry. The Kaichuang spring machine of Li manager reminder, in the use of 08 spring machine processing precision spring process, pitch control is very important. So, how to use 08 spring machine to control the spring pitch?
 
  ⑴When the pitch of the spring is small, the pitch of the spring can be controlled by a pitch push knife. When the spring pitch is small, the cutter holder is installed and fixed on the upper cutter holder of the 08 type computer spring machine. In addition, the pitch knife is divided into 30 degrees and 45 degrees of two kinds of specifications, can be combined with the operation needs to select the appropriate specifications.
 
  ⑵Pitch pitch can be used to control the pitch of the spring. When the pitch of the spring is large, the utility model is installed on the pitch push rod of the 08 type CNC spring machine, and the utility model is characterized in that the utility model is provided with a grinding needle. At this point, the upper knife holder installed on the knife, the lower knife seat with the installation of pitch knife to assist the line pressure (optional), with the pitch on the push rod to control the pitch, left to the contrary.
 
  ⑶When the pitch of the spring is moderate, the pitch of the spring can be controlled by a pitch push knife or a push rod. When the pitch of the spring is moderate, the control method of the spring pitch can be selected according to the operating habits. In general, the spring machine users or technicians in the daily operation will develop their own operating habits, regardless of the use of pitch control, and ultimately can achieve the purpose of controlling the pitch of the spring.
 
  In a word, there are two main ways to control the pitch of spring by means of type 08 spring machine, that is to say, the pitch of the spring can be controlled by means of pitch push or pitch push rod. Therefore, the article refers to the common mode of operation, it is recommended that the user or technical staff can choose according to their own practice and the actual situation of their own good methods.The content source to Kaichuang spring machine: http://www.kcmcnc.com/en/, welcome to see, do not copy rights reserved!