At present, the market has emerged a large number of manufacturers of spring machine, spring machine brand is relatively complicated, and each controller and computer system used by the manufacturers is also different, but many manufacturers use computer controller will be equipped with hand wheel function, in order to facilitate the programming and testing applications. The Kaichuang spring machine of Li manager reminder, when the spring machine in the "test" mode to start the wheel did not respond, to contact the manufacturers in a timely manner or to ask professionals to solve.
 
  The computer controller and kaichuang spring machine system "as an example, spring machine start shaking wheel did not respond for reasons in" test mode "and the solution: the hand wheel button does not start, press on the computer screen" wheel "button, the button in the" hand wheel "lights; the plug-in function is open, cause the hand wheel function is switched off (the early system is provided with a plug-in function, later plug-in function was canceled), this time need to press the" switch "button, then press the" wheel "button in the pop-up warning dialog box (" closed plug-in handwheel function? ") Select "yes", and then press "enter" key to confirm.
 
  In short, when the spring machine in operation if the above problems can be solved by the above method, at the same time, the user or operator can not arbitrarily change the system default settings parameters. In addition, if there is a similar problem, please contact with the manufacturer or ask professionals to operate in order to find a solution, so as to avoid unnecessary errors caused by the CNC spring machine.The content source to Kaichuang spring machine: http://www.kcmcnc.com/en/, welcome to see, do not copy rights reserved!